How to assemble a stunt scooter?

Make sure your stunt scooter is assembled correctly before you ride. All bolts and screws must be tightened, and the bar should be able to spin freely.

Please watch the guides below:

HIC system

How to assemble a scooter with an HIC compression system

1. Slide the clamp onto the handlebar.
2. Tighten the HIC compression.
3. Place the handlebar onto the fork/deck assembly and tighten the clamp bolts evenly.
4. Make sure both wheels are properly tightened.
5. Double-check that all bolts and screws are tight before you ride.

There may be small differences depending on the brand and model of your scooter.

SCS system

How to assemble a scooter with an SCS compression system

1. Take all parts out of the box and check that everything is included.
2. Fit the wheels on the axles and tighten the axle bolts (if they are not already mounted).
3. Fit the brake on the rear of the deck, if it is not already installed, and tighten the brake bolt.
4. Place the SCS clamp onto the fork.
5. Insert the bar into the clamp and set it to the desired height.
6. Tighten the SCS compression bolt with an Allen key.
7. Tighten the clamp bolts evenly with an Allen key.
8. Check that the bar spins freely and that all parts are secure.
9. Do a final visual check before you ride.

There may be small differences depending on the brand and model of your scooter.