Do you want to build your own unique scooter?

There is only one copy of the deck in the picture. It was uniquely designed for the launch of the NKD Turbine series. There are many other ways to personalize your scooter — choose the parts you think look cool.

 

Choose a deck

See the selection of decks Learn more about decks

Deck size does not have to be the only deciding factor. Riders prefer different lengths and widths — choose a deck that looks cool to you and suits your style.
In the flowchart you will be asked whether the deck is compatible with integrated or non-integrated headsets. That matters: integrated headsets only fit decks designed for them, and the same applies to non-integrated headsets.

Once you have selected a deck, check (1) whether a brake is included and (2) whether griptape is included. If no brake is included, choose one at the end of the flowchart. In most cases, griptape is not included with the deck. When choosing griptape, it should be the same width as the deck or wider — length is less critical. You can cut small patterns in the griptape to personalize the look.
Note the headset type, headtube length and which wheel diameters the deck supports — you will need those when choosing other parts.

 

Recommendations for headset types

See the selection of headsets Learn more about headsets

Integrated headsets — as the name suggests, the head cups are integrated into the deck’s headtube. Head cups are the seats where the bearings sit. You can only use integrated headsets on decks made for integrated headsets. A headset set usually includes (from the top): dust cap, c-ring, upper bearing, lower bearing and crown race.

We do not recommend non-integrated headsets for stunt scooters. Head cups must be pressed in with a specific tool and should only be fitted by an experienced workshop. These headsets are generally less durable and less suitable for tricks.

Choose a fork

See the selection of forks Learn more about forks

There are many different forks. Here is a short overview of what to check when buying a fork for a custom scooter — design, material and manufacturing are covered in more detail in the extended guide and on each product page. Note the fork length (usually the steerer tube length) and which compression systems the fork supports — you will need that next.

 

Length of the fork

The steerer tube on the fork must be longer than the headtube on the deck, so the bar and/or compression system can clamp onto the fork. As a rule of thumb, the fork steerer should be about 3 cm (30 mm) longer than the deck headtube.
Compression tips: For SCS, the fork should generally be no more than about 5 cm longer than the headtube. For IHC and HIC there is no strict upper limit, but around 3.8 cm or more of extra length vs. the headtube is a good target.

 

Compression system? Shim?

The fork specifications list which compression systems it supports. For a custom stunt scooter we recommend SCS, IHC, HIC or ICS. Threaded compression systems are not recommended.
Shim: Some forks do not include a compression shim. If yours does not, order an IHC shim (32 mm outer diameter) or HIC shim (35 mm outer diameter) — you will find them under scooter headsets / parts.

 

Choose the right bar. What is a slit? Which diameter?

See the selection of bars for scooters Learn more about bars

Bars come in different designs. Here are three key points — material, size and design are covered in more detail in the extended guide.
Slit: A gap at the bottom of some bars. It is required for IHC or HIC. If you use a slit bar with SCS, you need an SCS bar adapter.
Diameter: Check the outer and inner diameter in the product specs and follow the flowchart. Outer diameter determines the clamp. Inner diameter is typically 28 mm for IHC and 32 mm for HIC; for SCS it can be 28 mm or 32 mm.

 

Do the wheels fit the fork and deck?

See the selection of scooter wheels See the selection of brakes Learn more about wheels & bearings

Check which wheel sizes the fork supports, then which sizes the deck supports. Choose the largest size that works for both. Example: fork supports 100 mm and 110 mm; deck supports 100 mm, 110 mm and 120 mm → choose 110 mm front and rear. Larger rear wheels alone (e.g. 120 mm) can tilt the deck forward and hurt trick performance.

The brake is not always included with the deck. Choose a brake that matches the wheel size, and check that the mounting holes/screws match the deck.